Edit this page

Run the DL Workbench in the Intel® DevCloud for the Edge

Intel® DevCloud for the Edge is a computing resource to develop, test, and run your workloads across a range of Intel® CPUs, GPUs, and Movidius™ Myriad™ Vision Processing Units (VPUs). Running the DL Workbench in the DevCloud helps you optimize your model and analyze its performance on various Intel® hardware configurations. DevCloud is available for enterprise developers, independent developers, students, and faculty members.

When running the DL Workbench in the DevCloud, you can use the following DL Workbench features:

Feature

Supported

Single and group inference

Yes (HDDL plugin is not supported)

INT8 calibration

Yes

Accuracy measurements

Yes

Model output visualization

Yes

Visualization of runtime and Intermediate Representation (IR) graph

Yes

Connecting to your remote machine**

No

Downloading models from the Intel Open Model Zoo

Yes

Deployment package creation

Yes

JupyterLab* learning environment

No

** In the DevCloud, you are connecting only to remote machines that are available in it. You cannot work with your local workstation or connect to other machines in your local network.

Note

  • Profiling and calibration on DevCloud machines take more time than on a local machine due to the exchange of models, datasets, the job script, and performance data.

  • Inference results may insignificantly vary for identical environment configurations. This happens because the same environment in the DevCloud does not mean the same physical machine.

Start the DL Workbench in the Intel® DevCloud for the Edge

Run the DL Workbench in the Intel® DevCloud for the Edge. Duration: 4:10

  1. Register in the DevCloud. Shortly after the registration, you receive a mail with a link to the home page.

  2. Follow the link from the mail. Click Accept if you agree to the Terms and Conditions.

  3. Select Optimize tab and click Go There button to access DL Workbench.

    ../_images/devcloud_main_page.png

  4. The Jupyter* notebook called DLWorkbenchLauncher.ipynb opens:

    ../_images/jupyterlab_open.png

  5. Run Launch DL Workbench cell:

    ../_images/devcloud_launch.png

  6. The Start Application button appears.

    ../_images/devcloud_cell_2-1.png

  7. Once you click the button, the DevCloud starts initializing and loading the DL Workbench.

    ../_images/devcloud_cell_3-1.png

  8. In about a minute, the link appears under the cell:

    ../_images/devcloud_cell_4-1.png

Click this link to open the DL Workbench. Make sure your browser does not block pop-up windows as it prevents the tab from opening:

../_images/start_page_crop.png

You have started the DL Workbench in the DevCloud. A DL Workbench session in the DevCloud is limited to four hours. Remaining session time is indicated in the upper-right corner of the interface:

../_images/devcloud_time.png

After four hours, the Docker container with the DL Workbench stops, but your data is autosaved in the DevCloud. To continue working with the DL Workbench, restart the session.

See Also

Prev Next